I. Processing Technology
* Hot Rolling/Cold Rolling: Bar stock is hot-rolled into Φ5–12mm wire rods, then subjected to multiple cold rolling passes to reduce the diameter.
* Precision Drawing: Multiple cold drawing passes, combined with vacuum annealing to relieve stress, gradually drawing to the target wire diameter (commonly 0.49–1.8mm).
* Heat Treatment: Vacuum annealing (600–650℃), hydrogen removal treatment, ensuring toughness and dimensional stability.
* Surface Treatment: Pickling to remove oxide scale → Polishing → Anodizing/IP plating, improving wear resistance and corrosion resistance.
* Finishing and Inspection: Straightening, Length Measurement, Flaw Detection, ensuring tolerance within ±0.01mm.
* Bending and Forming: CNC wire bending machine forms wire loops, temples, and nose pads according to drawings.
• Welding: Vacuum/argon-protected laser welding, with stepped weld points (distinguishing it from the sloping bulges of alloys).
• Assembly and Surface Finishing: Assembly of hinges and nose pads, followed by polishing/coloring.
Pure titanium eyeglass lenses are a core material for high-end eyeglasses, suitable for long-term wear and those with sensitive skin.

II. Core Advantages
• Ultralight: Density 4.5g/cm³, approximately 40% lighter than stainless steel, significantly reducing pressure on the bridge of the nose.
• Hypoallergenic: Nickel-free, allergy rate <0.3%, suitable for sensitive skin.
• Corrosion Resistant: Dense oxide film on the surface, resistant to sweat, seawater, and cosmetics, does not tarnish over time.
• High Strength: High specific strength, ensuring structural stability even with small diameters.
• Easy to Process: Suitable for precision bending and laser welding, adaptable to complex designs.
III. How to Identify Pure Titanium Eyeglass Lenses
IP Vacuum Plating: While most metals use water-based electroplating, pure titanium and titanium alloys require IP plating for high adhesion and resistance to fading.
2. Design: Pure titanium eyeglass lenses are commonly used, with few complex designs.
3. Color: The silver of titanium frames is more whitish, while alloy frames are darker.
4. Magnetism: Magnetism doesn't necessarily mean it's titanium, and the absence of magnetism doesn't guarantee it's titanium. It's more accurate to say that if it exhibits strong magnetism, it's likely not titanium.
Hot Tags: pure titanium eyeglass lense, China pure titanium eyeglass lense manufacturers, suppliers, factory, titanium al6v4, titanium and tungsten alloy, titanium manganese alloy, titanium bolt grades, titanium hex nut, timascus bar







