Products Description
1.Titanium plate cutting process

Cutting
cutting uses a shear to cut the material, usually by a worker using a measuring tool such as a tape measure to measure the size to be cut beforehand, and then several people work together to make the cut. This method of cutting titanium plates is highly efficient and can quickly complete the operation in a short period of time, but it may lead to deformation if it is not operated properly. In addition, the shearing machine can only cut plates up to 12mm thickness, which may produce some errors due to manual operation. Shears are generally suitable for titanium plate cutting pieces with more regular shapes.

Waterjet Cutting
Waterjet cutting process, that is, the use of ultra-high-pressure technology to pressurize tap water to 250-400Mpa high pressure, and then through the inner hole diameter of about 0.10-0.35mm jeweled nozzle, the formation of high-speed jet speed of 800-1000m/s, this high-speed jet is commonly known as the "waterjet". Water jet cutting belongs to a new type of cold processing technology, it can be used in poor conditions and strictly prohibit the use of fire and smoke on the scene, has been widely valued, water jet cutting is a set of mechanical, electronic, computer, automatic control technology as one of the results of high-tech, is the development of a brand-new material processing methods in recent years. Our company has advanced water cutting equipment, most of the shaped titanium plate cutting pieces are completed by water cutting technology, cut out the product has been praised by customers, the size is accurate, the surface cleanliness is high, reducing the scratch on the titanium plate.

Laser Cutting
Laser cutting uses a high-powered laser beam to cut materials. This method is very precise and produces clean, smooth edges. However, laser cutting generates heat, which can lead to hardening of titanium work. Therefore, it is important to use the proper laser settings and cooling techniques.Because of the small laser spot, high energy density and fast cutting speed, laser cutting can obtain better cutting quality.The laser cutting kerf is fine and narrow, the two sides of the kerf are parallel and perpendicular to the surface, and the dimensional accuracy of the cut parts can reach ±0.05mm.The cutting surface is smooth and beautiful, the surface roughness is only a few tens of microns, and even laser cutting can be used as the last process, without mechanical processing, parts can be used directly.Laser cutting due to the laser power and equipment volume limitations, laser cutting can only cut medium and small thickness of the plate and tube, and with the increase in the thickness of the workpiece, the cutting speed decreased significantly.
2.Application
Titanium sheet cut parts are usually customized according to the needs of some mechanical equipment or special applications, and are widely used in chemical equipments, heat exchange equipments, mechanical parts, aircraft fuselage, engine parts, high-performance automotive parts, ship parts and so on.
Hot Tags: titanium plate cutting parts, China titanium plate cutting parts manufacturers, suppliers, factory, ti bolts, titanium bar, titanium plate, titanium bolts, titanium wire mesh, titanium tube price







