2025.6.11 The Company's titanium sheet rolling program is as follows:
GR1:10*1060*Lmm Qty:18.8t
GR2:10*1530*Lmm Qty:10.5t
Rolling of titanium plates is divided into four main processes: heating, roughing, finishing, cooling and surface treatment.
Heating: the titanium slab is placed at a high enough temperature, simply put, the right temperature, the suitable temperature of titanium plate is at 900 ℃ ~ 1000 ℃. When the time is long enough, the general heating and holding time is more than 4~4.5 hours.
Rough rolling: After the heated titanium billet is descaled by high-pressure water to remove iron oxide on the surface, it enters the rough rolling mill for preliminary molding. Roughing is usually done by reversible rolling (e.g., two- or four-roll mills), where the billet is rolled to an intermediate thickness in multiple passes. This stage may also include spreading or shaping rolling to adjust width and shape.
Finishing Rolling: After the intermediate billet is processed by cutting head and tail, it enters the multi-stand finishing rolling unit (e.g., 7-stand four-roll mill). Finishing rolling rolls the material to its final thickness through high-speed rolling and precise undercut control, and adopts closed-loop control technology for plate shape to ensure dimensional accuracy.
Cooling and winding: After finishing rolling, the titanium coils are rapidly cooled down to the winding temperature by a laminar flow cooling system, and then formed into coils by the winding machine. Cooling needs to be dynamically adjusted according to different grades of titanium materials and final rolling temperatures to optimize material properties.
